00

Cart

HomeShopImpact DriversPanasonic EZ1PD1 Impact Driver 14.4V / 18V (bare tool) (JAPAN IMPORT)
Save £15

Panasonic EZ1PD1 Impact Driver 14.4V / 18V (bare tool) (JAPAN IMPORT)

£230.00£275.00

Add to wishlist 1Add to compare
SKU: EZ1PD1 Category:

Description

Specifications / Capabilities

Chuck New one-touch bit lock method (dimension up to step is 13 mm)
Maximum tightening torque
(forward / reverse same torque)
《18V》 Strong mode 155N ・ m, Medium mode 120N ・ m, Weak mode 40N ・ m
《14.4V》 Strong mode 140N ・ m, Medium mode 120N ・ m, Weak mode 40N ・ m
Rotation speed Strong mode: 0 to 2,700 rpm, Medium mode: 0 to 1,600 rpm, Weak mode: 0 to 1,000 rpm Mode
for tex: 0 to 2,700 rpm
Number of hits Strong mode: 0 to 4,100 times / minute, Medium mode: 0 to 3,100 times / minute, Weak mode: 0 to 2,100 times / minute
Text mode: 0 to 2,100 times / minute
LED light 3 modes (switch interlocking, manual ON, manual OFF)
Body dimensions / mass 《18V 5.0Ah》 Overall length 98 × Overall height 243 × Width
59mm / 1.5kg 《18V 3.0Ah》 Overall length 98 × Overall height 227 × Width
59mm / 1.3kg 《14.4V 5.0Ah》 Overall length 98 × Overall height 235 × Width 59mm / 1.4kg
Vibration 3-axis composite value 13.7m / s 2
Ability
(approximate, fully charged)
18V 5.0Ah 18V 3.0Ah 14.4V 5.0Ah
screw tightening Universal screw, Douglas fir (φ4.2 x 75 mm) Approximately 550 Approximately 330 Approximately 440
Tex screw, SPC (φ4 x 13 mm, plate thickness 1.6 mm) Approximately 1,100 Approximately 660 Approximately 710
Drilling DL core (φ21, gypsum board 12.5mm + control panel 12.5mm) About 150 holes About 100 holes About 150 holes
Concrete hole (φ3.5 × 30mm, mortar) Approximately 570 Approximately 340 Approximately 340

When the attachment is attached

Product name EZ9HX500
(Sumi strike attachment)
EZ9HX501
(angle attachment)
Chuck New one-touch bit lock method (dimension up to step is 13 mm)
Center height 13mm 18mm
Head height 53mm
Mounting angle 8 directions (in 45 degree increments)
Body dimensions / mass Overall length 97mm 290g Overall length 103mm 250g
Working range screw tightening Universal screw, Douglas fir / φ3.5-φ6.8
Tex screw / SPC (thickness 1.6 mm) /φ3.5 to φ6
Drilling Woodworking drill / particle board
(thickness 20 mm) / ~ φ35
Woodworking hole saw / particle board
(thickness 20 mm) / ~ φ36

 

IMPORTED – LEAD TIME IS 5-8 WORKING DAYS

Additional information

Weight 1.2 kg
Dimensions 26 × 16 × 13.5 cm
Colour

Red, Black, Yellow

Brand

Panasonic

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.